home page
saw comparison
diamond laser 7000
diamond laser 5000
order form

DL 5000 Manual
DL 7000 Manual
Download Brochure
diamond laser 7000

Creative Custom Installation

diamond laser 5000 wet band saw

Modern Day Wet Band Saw

Modern-day fabricators are facing new challenges with increased use of glass mosaics and tile inlay in todays fabrications. The DL5000 helps meet these challenges. The DL5000 cuts through tile, stone, porcelain and glass with ease, speed and comfort - the key is its three-wheel system. The top wheel assembly pivots on a seperate bearing with suppressors controlling its motion. By absorbing more vibration, the saw is capable of extremely effective blade-material contact. With the blade tensioning knob directly connected to the top wheel assembly, accurate adjustments can then be made. This portable band saw is a contactor’s best friend.

Features and Benefits

  • Cuts tile, stone and glass, up to 3/4” thick
  • 12” throat for deep diagonal cuts
  • 15” x 13” cutting table with miter guide for precision angle cutting
  • 1/2 HP variable speed motor for more controlled cutting
  • Recirculating water pump with removable water tray keeps saw running clean
  • Rugged and portable for onsite use
  • One year warranty, instruction manual and tech support
  • One Diamond-coated blade. (Optional 4.50mm glass blade available. Ideal for cutting glass slab or glass tile)

Diamond Laser 5000 Glass Assembly (2 blades) $1,265.00
Diamond Laser 5000 Tile Assembly $1,215.00
Replacement Glass Blade $135.00
Replacement Tile Blade $135.00
Replacement Guide Set $50.00

DL5000 Specifications

Maximum Horsepower 1/2 HP variable speed
Motor Shaft RPM 3700 (Max)
Overall Dimensions
Length (with table) 28"
Height 25"
Weight 45 lbs. (20.4 kg)
Table Size 15" x 13"
Throat Depth
(depth of cut into field)
Blade Length
(continuous band)
Blade Thickness
(width of cut)
0.015" (0.38 mm)
Blade Depth
Tile 0.25" (6.0 mm)
Glass 0.17" (4.5 mm)
Minimum Radius Cut 1/4" - 1/2"
Maximum Recomended
Cutting Thickness
3/4" marble/granite
3/4" glass
Cutting Speed
3/8" Ceramic Tile 30"/minute
1/2" Glass tile 30"/minute
Blade Life Estimate
(cutting hours will vary based on material cut and operator experience)
3/8" Ceramic tile 50 - 60 cutting hrs.
Glass 40 - 60 cutting hrs.
Porcelain 20 cutting hrs.
Primary and Applications
On-Site Contractor Installation Use radius cuts, trimming around fixtures Custom Mosaic Inlay and Specialty Cuts
3/8" - 1/2" ceramic tile, porcelain, marble, granite, limestone, glass

Download the DL5000 Manual (pdf)


© 1995-2015, Diamond Tech Tampa, Florida . Email: . Fax: 813-806-1988